Datasheet4U Logo Datasheet4U.com

BM2P0162T-Z - DC/DC Converter

General Description

The PWM type DC/DC converter for AC/DC provides an optimal system for all products that require an electrical outlet.

These ICs support both isolated and non-isolated devices and enable simpler designs of various types of a low power consumption electrical converters.

Key Features

  • PWM Current Mode Method.
  • Frequency Hopping Function.
  • Burst Operation at Light Load.
  • Frequency Reduction Function.
  • Built-in 650 V Startup Circuit.
  • Built-in 650 V Switching MOSFET.
  • VCC UVLO (Under Voltage Lockout).
  • VCC OVP (Over Voltage Protection).
  • Soft Start Function.
  • FB OLP (Over Load Protection).
  • Over Current Detection Function per Cycle.
  • Over Current Detection AC Voltage Compensation Function.
  • SOURCE Pin Open Protection Functio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BM20 Bluetooth 4.1 Stereo Audio-Module ISSC
BM2262 Remote control coding IC Bookly
BM23 Bluetooth 4.1 Stereo Audio-Module ISSC
BM2300 N-Channel Enhancement Mode MOSFET Bookly
BM2301 P-Channel MOSFET Bookly

Other Datasheets by ROHM

Part Number Description
BM2P016-Z DC/DC Converter
BM2P0161-Z DC/DC Converter
BM2P0163T-Z DC/DC Converter
BM2P016T PWM type DC/DC converter
BM2P011 DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet AC/DC Converter PWM Type DC/DC Converter IC with Integrated Switching MOSFET BM2P0162T-Z BM2P0163T-Z General Description The PWM type DC/DC converter for AC/DC provides an optimal system for all products that require an electrical outlet. These ICs support both isolated and non-isolated devices and enable simpler designs of various types of a low power consumption electrical converters. The built-in 650 V startup circuit contributes to low power consumption. Power supplies can be designed flexibly by connecting a current detection resistor for the switching externally. Current is restricted in each cycle and excellent performances are demonstrated in a bandwidth and transient response since a current mode control is utilized.