Overview: -VIN (4) 1.90 (48.26) ELECTRONIC PONENTS HIGH SIGNAL HERE DISABLE OUTPUT -VIN (4) TRIM (7) S E R I E S -SENSE (6) 132-200 WATT 4:1 INPUT RANGE DC-DC CONVERTERS External Output Trim
OUTPUT SPECIFICATIONS:
Voltage Accuracy........................................……......…..........±1.5% max Transient Response: 25% Step Load Change………..….......<500u sec. External Trim Adj. Range6………………….…. ……...........................±10% Ripple & Noise3, 20MHz BW 3.3V & 5V…….…..................40mV RMS, max. 100mV pk-pk, max. 12V & 15V…….….................60mV RMS, max. 150mV pk-pk, max. 24V…….…..........................100mV RMS, max. 240mV pk-pk, max. Temperature Coefficient...........................…....….……...........±0.03%/˚C Short Circuit Protection...............................…….……...........Continuous Line Regulation1 ..............……………………….…..................±0.2% max. Load Regulation2......................….….………………...............±0.2% max. Over Voltage Protection Trip Range, % Vo nom…………......115-140% Current Limit……………………………….......110-150% Nominal Output
+SENSE (8) TRIM UP TRIM (7) TRIM DOWN -SENSE (6) -SENSE (6) TRIM (7) 10K ohms TRIMPOT +SENSE (8) NOTE:
1. Measured From High Line to low Line 2. Measured From Full Load to Zero Load 3. Output Ripple and Noise measured with 10uF tantalum and 1uF Ceramic capacitor across output 4. Logic patibility......................................Open Collector ref to-lnput Module ON ............................>3.5Vdc to 75Vdc or Open Circuit Module OFF ...........................<1.2Vdc 5. Suffix "N" to the model Number with Negative Logic Remote ON/OFF Module ON ............................<1.2Vdc Module OFF ...........................>3.5Vdc to 75Vdc or Open Circuit 6. Trim-up.................Connect a Resistor Between the Trim Pin and+Sense Trim-Down.............
