LM2455-EM - ZigBee and IEEE802.15.4 compliant 2.4GHz ZigBee Module

General Description

First Version Section6.1 -Modify [Figure 1]

Section6.3 -Modify antenna matching circuit and procedure.

Section7 -Modify DC/RF Characteristics.

Section 6.1 -Modify [Figure 2]

Section 6.2 -Modify (a), (b), (c).

Section 6.3 -Modify matching circuit(C6A: 6pF -> 1nF) -

📥 Download Datasheet

LM2455-EM zigbee and ieee802.15.4 compliant 2.4ghz zigbee module by RadioPulse - Datasheet Preview

Datasheet Details

Part number	LM2455-EM
Manufacturer	RadioPulse
File Size	1.00 MB
Description	ZigBee and IEEE802.15.4 compliant 2.4GHz ZigBee Module
Datasheet	LM2455-EM Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
LM2450	220V Monolithic Triple Channel 7 MHz DC Coupled CRT DTV Driver	National Semiconductor
LM2450	220V Monolithic Triple Channel 7MHz DC Coupled CRT DTV Driver	Texas Instruments
LM2451	220V Monolithic Triple Channel 12 MHz DC Coupled CRT DTV Driver	National Semiconductor
LM2451	LM2451 220V Monolithic Triple Channel 12 MHz DC Coupled CRT DTV Driver (Rev. I)	ETCTI
LM2452	220V Monolithic Triple Channel 17 MHz DC Coupled CRT DTV Driver	National Semiconductor

Other Datasheets by RadioPulse

Part Number	Description
LM2475-EM	System-on-Chip (SOC) based on 2.4GHz ISM Band

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

LM2455-EM Datasheet (No. ADS0105) V.1.45 ADS0105 LM2455-EM Datasheet REVISION HISTORY Version VER.1.0 VER.1.1 VER.1.2 VER.1.3 VER.1.4 Date 2007.10.4 2007.11.6 2007.12.29 2007.3.4 2008.4.10 Description ▪ First Version ▪Section6.1 -Modify [Figure 1] ▪Section6.3 -Modify antenna matching circuit and procedure. ▪Section7 -Modify DC/RF Characteristics. ▪Section 6.1 -Modify [Figure 2] ▪Section 6.2 -Modify (a), (b), (c). ▪Section 6.3 -Modify matching circuit(C6A: 6pF -> 1nF) -Modify [Figure 5] ▪Section 7.1 -Change Sleep Current -Consumption Current(Change TX, RX ) ▪Section 8 -Table1: Delete Pin 8, 9 and delete input of Pin 6. ▪Section 10 -Modify circuit. ▪Section 10 -Modify circuit(delete C17 ) ▪Section 5 -Modify the contents of Power section. ▪Section 6.