RC1701VHP-MBUS4 Datasheet | Radiocrafts

Description The RC1701HP-MBUS is part of a pact surface-mounted Wireless M-Bus module family that measures only 12.7 x 25.4 x 3.7 mm. The module contains a munication controller with embedded wireless M-Bus protocol software supporting the new EN13757-4:2018 Mode N and is pre-certified for operation under the European radio regulations. Applications - Wireless M-Bus - Automatic Meter Reading (AMR) - Advanced Metering Infrastructure (AMI) - Gas and Water meters - Electricity meters - Heat meters, Heat cost allocators - Readers and concentrators - Asset Tracking and Tracing Note: The number of LGA pads differ from photo, see page 8 for details Features - Embedded Wireless M-Bus protocol supporting EN 13757-4:2018 mode N - High power, long range (20 km Line-Of-Sight) - Industry leading Wireless M-Bus protocol stack - pletely shielded - Pin patible with the RC11XX (including - MBUS, - KNX, -TM and RC232 versions) and 2.4 GHz versions RC2500/2500HP from Radiocrafts - 12.7 x 25.4 x 3.7 mm pact module for SMD mounting - No external ponents except antenna - Antenna tuning feature - 2.8 - 3.6 V supply voltage, ultra low power modes - Conforms with EU RED directive (EN 300 220, EN 301 489, EN 60950) - EN300-220 Cat 1 receiver option for optimum selectivity - Configurable LBT as defined in CIG UNI/TS 11291-11-4 - Output power table in 3 d B steps from -27 d Bm to +27/30 d Bm as defined in CIG UNI/TS 11291-11-4 Quick Reference Data Parameter Frequency bands Number of channels Data rate Max output power Sensitivity, (2.4 / 4.8 / 19.2) Supply voltage Current consumption, RX /IDLE Current consumption, TX (+27/30 d Bm) Current consumption, SLEEP Temperature range RC1701HP-MBUS 169.4 - 169.8125 41 2.4, 4.8, 6.4, 19.2 + 27/30 d Bm -119/-115/-107 - 3.6 31.7 403 / 703 Max 2.0 -30 to +85 Unit MHz kbps d Bm d Bm Volt m A m A u A C ©2018 Radiocrafts...