Overview: RT3050/52
Datasheet
Preliminary Revision August 14, 2008 Application
802.11 b/g/n AP/Router Dual Band Concurrent Router • NAS • iNIC
Support 16/32-bit SDR SDRAM (up-to 64M bytes) SDRAM data [31:16] sre pins shared with GPIO Support boot from 8/16-bit parallel NOR type Flash The RT3052 SOC combines Ralink’s 802.11n draft compliant 2T2R MAC/BBP/RF, a high performance 384MHz MIPS24KEc CPU core, 5-port integrated 10/100 Ethernet switch/PHY, an USB OTG and a Gigabit Ethernet MAC. With the RT3052, there are very few external components required for 2.4GHz 11n wireless products. The RT3052 employs Ralink 2nd generation 11n technologies for longer range and better throughput. The embedded high performance CPU can process advanced applications effortlessly, such as routing, security and VOIP. The USB por t can be configured to access external storage for Digital Home applications. In addition, the RT3052 has rich hardware interfaces (SPI/I2S/I2C/UART/GMAC) to enable many possible applications. (up-to 16M bytes))
Support boot from NAND type Flash (up-to 64 M bytes) Support boot from ROM iNIC mode USB2.0 OTG x 1 Embedded a 7-port Ethernet switch and a 5 port 10/100Mbps PHY
Support 5 10/100 UTP ports and one RGMII/MII port for RT3052 only
Hardware NAT, QoS, TCP/UDP/IP Checksum offloading Slow speed I/O : GPIO, I2C, SPI, UART, MDC/MDIO, JTAG,PCM and I2S Package and I/O voltage 14mm x 14mm TFBGA-289 Package I/O : 3.3V/2.5V(RGMII), 3.
