Overview: RT5350
Preliminary Datasheet PreliminaryDatNovember 25, 2010 Introduction
The RT5350 SoC combines Ralink’s IEEE 802.11n draft compliant 1T1R MAC/BBP/PA/RF, a high performance 360 MHz MIPS24KEc CPU core, a 5-port integrated 10/100 Ethernet switch/PHY and a USB host/device. With the RT5350, there are very few external components required for 2.4 GHz 802.11n wireless products. The RT5350 employs Ralink’s 2nd generation 802.11n technologies for longer range and better throughput. The embedded, high performance CPU can easily manage advanced applications such as Wi-Fi data processing without overloading the host processor. In addition, the RT5350 offers a variety of hardware interfaces (SPI/I2S/I2C/PCM/UART/USB) to support a range of possible applications. Applications
iNIC Embedded 1T1R 2.4G CMOS RF Embedded 802.11n 1T1R MAC/BBP with MLD enhancement Embedded PA/LNA 150 Mbps PHY data rate 20 Mhz/40 MHz channel width Legacy and high throughout modes Compressed block ACK Bluetooth Co-existence Multiple BSSID (up to 16) WEP64/128, WPA, WPA2, WAPI engines QOS - WMM, WMM Power Save Hardware frame aggregation Supports 802.11h TPC AP/Router MIPS 24KEc 360 Mhz with 32 KB I cache/16 KB D cache Supports 16-bit SDR SDRAM (up to 64 MB) Supports boot from ROM, FLASH USB 2.0 HOST/Device dual mode x1 Embedded 5-port 10/100 Mbps Ethernet switch and 5-port UTP PHY Supports 5 10/100 UTP ports Slow speed I/O : GPIO, SPI, I2C, I2S, PCM, UART, and JTAG Packaging and I/O voltage 12 mm x 12 mm TFBGA-196 package I/O: 3.
