TX125 Datasheet | Raltron Electronics

FEATURES WIDE FREQUENCY RANGE TO 800.00 MHz ENABLE/DISABLE AND VOLTAGE CONTROL OPTIONS TTL, HCMOS, ACMOS, SINEWAVE, CLIPPED SINEWAVE, ECL, AND PECL SPECIFICATIONS FREQUENCY RANGE 1.00 TO 800.00 MHz (SEE TABLE 1) A: ±0.5 PPM OVER 0° C TO 50° C B: ±1.0 PPM OVER 0° C TO 70° C C: ±1.0 PPM OVER -20° C TO 70° C D: ±1.5 PPM OVER -30° C TO 75° C E: ±2.0 PPM OVER -40° C TO 85° C ±1.0 PPM MAXIMUM ±1.0 PPM MAXIMUM PER YEAR -50° C TO 90° C SEE TABLE 1 FOR OUTPUT TYPES SEE TABLE 1 FOR LOAD CHARACTERISTICS ±0.1 PPM MAXIMUM FOR ±10% VARIATION FROM STANDARD LOAD +5.0 VDC ±5% ±0.2 PPM MAXIMUM FOR ±5% VARIATION FROM NOMINAL SUPPLY SEE TABLE 1 FOR CURRENT CHARACTERISTICS SEE TABLES 2 AND 3 FOR PIN FUNCTION AND VOLTAGE SEE TABLE 4 FOR CHARACTERISTICS SEE TABLE 5 TX 125 AND TV125 FREQUENCY STABILITY OVER OPERATING TEMPERATURE FREQUENCY STABILITY VS. CALIBRATION FREQUENCY STABILITY VS. AGING STORAGE TEMPERATURE RANGE OUTPUT WAVEFORM LOAD FREQUENCY STABILITY VS. LOAD VARIATION SUPPLY VOLTAGE FREQUENCY STABILITY VS. SUPPLY VARIATION SUPPLY CURRENT ENABLE/DISABLE FUNCTION (TE OPTION) VOLTAGE CONTROL FUNCTION (TV OPTION) ENVIRONMENTAL CONDITIONS OUTPUT WAVEFORM AND LOAD CHARACTERISTICS TABLE 1 - OUTPUT WAVEFORM AND CHARACTERISTICS, FREQUENCY RANGE, AND MODE OF OSCILLATION OUTPUT WAVEFORM CLIPPED SINEWAVE OUTPUT CODE 0 FREQUENCY RANGE MODE OF OSCILLATION CODE F: FUNDAMENTAL OUTPUT CHARACTERISTICS LOAD: 10 K OHM // 10p F OUTPUT LEVEL: 0.7 V P-P MINIMUM SYMMETRY: 60/40 % TO 40/60 % TYPICAL 8.00 MHz TO 40.00 MHz 1.00 MHz TO 30.00 MHz 30.00 MHz TO 100.00 MHz 32.00 MHz TO 160.00 MHz LOAD: HCMOS TO DRIVE 2 LS TTL NOMINAL OR 10 LS TTL MAXIMUM GATES "1" LEVEL: +2.4 VDC MINIMUM F: FUNDAMENTAL "0" LEVEL: +0.1 VCC MAXIMUM O: OVERTONE SYMMETRY: 40/60 TO 60/40% AT 1.2 V P: PHASE LOCKED LOOP (PLL) RISE AND FALL TIME: 10 ns MAXIMUM CURRENT: 20 m A MAXIMUM (F), 30 m A MAXIMUM (O), 45 m A MAXIMUM (PLL) LOAD: 2 LS TTL/HCMOS NOMINAL OR 10 LS TTL/HCMOS MAXIMUM GATES "1" LEVEL: +4.5 VDC MINIMUM "0"...