10AW48R12-12 Datasheet | Reliability

.Data Sheet.co.kr Product Data Sheet 10 Watt DC/DC Converters Key Features - - - - - - - Wide Input Ranges Typical Efficiency of 80% (76% For 3.3V) Remote On/Off Overvoltage Protection Meets FCC Section 15 Sub Part J Class B Radiated, Class A Conducted U.L., CSA Approved CE (LVD) Applications - - - - - Telemunications Equipment Digital Circuits Private Branch Exchange Distributed Power Systems Analog Systems The 10 Watt DC/DC converters operate from wide input ranges. A low profile makes them ideal for board-mounted applications where space is at a premium. Available in single and dual outputs. General Electrical Specifications (Specifications at Nominal Input and 25 C, nominal input voltage and rated output current unless otherwise noted.) INPUT SPECIFICATIONS Input Voltage Range Input Filter Input Current Input Transient Voltage Reverse Voltage Protection Startup & Shutdown Voltage (C), (CNE), (SN) Start Up Time (power applied) (C), (CNE), (SN) Turn-on Overshoot (10A48R5SN only) Remote On/Off Enable Inhibit, Logic Low Start Up Time See Selection Guide Pi Type, LC on "AW" See Selection Guide 100 VDC for 100 ms. None ≤(30), (36) VDC (<5 ms), (.25 to 15 ms) .25VDC (Max) Open Circuit I sink < 0.1ma, < 0.5 VDC < 1ms Datasheet pdf - http://..net/ .Data Sheet.co.kr Product Data Sheet Output Specifications Voltage Variance/Regulation (across: temp, input, & load range) Single 3.3v, 5v, 6.5 Single 15v Dual ±5v, ±12v, ±15v Ripple & Noise 20 Mhz Bandwidth (SN) (C), (CNE), or No Letter Duals ±12, ±5 Transient Response (SN) ± 25% from 10% to 100% of rated load, ± 5% voltage deviation (C) & (CNE) ± 25% from 50% to 90% of rated load, ± 5% voltage deviation Load Current Maximum Minimum Short Circuit Protection (SN), (C), (CNE), or No Letter Power Output No Derating to 71° C No Derating to 85° C Overvoltage Protection FCC Sect. 15 Sub Part J Isolation Operating Temperature (SN) (C), (CNE), or No Letter Storage Temperature (SN) (C), (CNE), or No...