HA16158FP Datasheet | Renesas

Description The HA16158 is a power supply controller IC bining an AC-DC converter switching controller for power factor correction and an off-line power supply switching controller. The PFC (power factor correction) section employs average current mode PWM and the off-line power supply control section employs peak current mode PWM. The HA16158 allows the operating frequency to be varied with a single timing resistance, enabling it to be used for a variety of applications. The PFC operation can be turned on and off by an external control signal. Use of this on/off function makes it possible to disable PFC operation at a low line voltage, or to perform remote control operation from the transformer secondary side. The PWM controller includes a power-saving function that reduces the operating frequency to a maximum .. of 1/64 in the standby state, greatly decreasing switching loss. The PFC section and PWM section are each provided with a soft start control pin, enabling a soft start time to be set easily. Features <Maximum Ratings> - Supply voltage Vcc: 24 V - Operating junction temperature Tjopr: - 40°C to +125°C <Electrical Characteristics> - VREF output voltage VREF: 5.0 V ± 2% - UVLO start threshold VH: 16.0 V ± 1.0 V - UVLO shutdown threshold VL: 10.0 V ± 0.6 V - PFC output maximum duty cycle Dmax-pfc: 95% typ. - PWM output maximum duty cycle Dmax-pwm: 45% typ. <Functions> - Synchronized PFC and PWM timing - PFC function on/off control - PWM power-saving function (frequency reduced to maximum of 1/64) - PWM overvoltage latch protection circuit - Soft start control circuits for both PFC and PWM - Package lineup: SOP-16/DILP-16 .. .. .. HA16158P/FP Pin Arrangement GND PWM-OUT PFC-OUT VCC PFC-ON VREF CAO PFC-CS 1 2 3 4 5 6 7 8 (Top view) 16 15 14 13 12 11 10 9 PWM-CS PWM-P PWM-SS PFC-SS PFC-EO PFC-FB IAC RT Pin Functions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Name GND PWM-OUT PFC-OUT VCC PFC-ON VREF CAO PFC-CS RT IAC PFC-FB PFC-EO PFC-SS PWM-SS...