AT25FF041A
AT25FF041A is SPI Serial Flash Memory manufactured by Renesas.
Features
- Voltage Range: 1.65 V
- 3.6 V
- Serial Peripheral Interface (SPI) patible
- Supports SPI modes 0 and 3
- Supports dual output operation (1-1-2)
- Supports quad output operation (1-1-4)
- Supports quad I/O Xi P operation (1-4-4, 0-4-4)
- 133 MHz maximum operating frequency
- Flexible, optimized erase architecture
- Uniform 4-k Byte block erase
- Uniform 32-k Byte block erase
- Uniform 64-k Byte block erase
- Full chip erase
- Flexible programming
- Byte/Page program (1 to 256 Bytes)
- Sequential program mode capability
- Erase program suspend resume
- 1 x 128-byte factory-programmed unique identifier
- 3 x 128-byte One Time Programmable (OTP) security registers
- Software controlled Reset and Terminate mands
- Multiple memory protection schemes
- Individual block protection
- User-definable protected area at start or end of memory array (default)
- Hardware reset option
- JEDEC hardware reset
- Non-volatile/volatile Status Registers
- JEDEC standard manufacturer and device ID
- Serial Flash Discoverable Parameters (SFDP)
- Low power dissipation
- 30 µA standby current (typical)
- 8.5 µA Deep Power-Down (DPD) current
(typical)
- 7 n A Ultra Deep Power-Down (UDPD) current
(typical)
- 8.5 m A active read current (1-1-1
- 104 MHz)
- 8.5 m A program current
- 9.6 m A erase current
- User-configurable and auto I/O pin drive strength...
