AT25SF128A Datasheet | Renesas

Features - Single voltage operation with range of 2.7 V to 3.6 V - Serial Peripheral Interface (SPI) patible - Supports SPI modes 0 and 3 - Supports SPI dual output operations (1-1-2) - Supports quad output operations (1-1-4) - Supports quad I/O operations (1-4-4, 0-4-4) - Read operations - Up to 133 MHz at 85 o C - Up to 120 MHz at 105 o C - Continuous Read mode (with 8/16/32/64 bytes wrap) - optimized for Xi P - Flexible erase architecture and time - Block erase 4 k B: 70 ms (typical) - Block erase 32 k B and 64 k B: 150 ms and 250 ms (typical) - Full chip erase: 30 s (typical) - Flexible programming and time - Page/byte program: from 1 to 256 bytes - Page program time: 0.6 ms (typical) - Erase program suspend resume - JEDEC Standard Manufacturer and Device ID - Memory protection support - User-definable protected area at start or end of memory array - Enable/disable protection with WP pin - 3 x 256-byte One-Time Programmable (OTP) security registers - Serial Flash Discoverable Parameters (SFDP) register - Low Power Dissipation - Standby current: 13 µA (typical) - Deep power-down current: 2 µA (typical) - Active read current: 10 m A (typical) - User-configurable I/O pin drive strength levels - Endurance: 100,000 program/erase cycles - Data Retention: 20 Years - Temperature Range - Industrial: -40 o C to 85 o C - Extended: -40 o C to 105 o C - Industry standard green (Pb/Halide-free/Ro HS pliant) package options - 8-pad W-SOIC (208-mil) - 8-pad DFN (5 x 6 x 0.6 mm) - 8-pad DFN (6 x 8 x 0.8...