Renesas Electronics DA14580
The DA14580 integrated circuit has a fully integrated radio transceiver and baseband processor for Bluetooth® low energy. It can be used as a standalone application processor or as a data pump in hosted systems. 84 kB ROM 8 kB Retention SRAM Power management Integrated Buck/Boost DC-DC converter P0, P1, P2 and P3 ports with 3.3 V tolerance Easy decoupling of only 4 supply pins The DA14580 supports a flexible memory architecture Supports coin (typ.| Part No. | DA14580 |
|---|---|
| Datasheet | DA14580 Download |
| Manufacturer |  Renesas Electronics |
| Description | Bluetooth Low Energy 4.2 SoC |
| Buy | Stock & Price |
GENERAL DESCRIPTION
● 42 kB System SRAM● 84 kB ROM
● 8 kB Retention SRAM
● Power management
● Integrated Buck/Boost DC-DC converter
● P0, P1, P2 and P3 ports with 3.3 V tolerance
● Easy decoupling of only 4 supply pins The DA14580 supports a flexible memory architecture
● Supports coin (typ. 3.0 V) and alkaline (typ. 1.5 V) for storing Bluetooth profiles and custom application battery cells code, which can be updated over the air (OTA). The
● 10-bit ADC for battery voltage measurement qualified Bluetooth low energy protocol stack is stored in a dedicated ROM. All software runs on the ARM® Cortex®-M0 processor via a simple scheduler.
● Digital controlled oscillators
● 16 MHz crystal (±20 ppm max) and RC oscillator
● 32 kHz crystal (±50 ppm, ±500 ppm max) and The Bluetooth low energy firmware includes the L2CAP service layer protocols, Security Manager (SM), Attribute Protocol (ATT), the Generic Attribute Profile (GATT) and the Generic Access Profile (GAP). All profiles published by the Bluetooth SIG as well as custom profiles are supported.
