EL5167 Datasheet PDF (1.4GHz Current Feedback Amplifier)

EL5167 - 1.4GHz Current Feedback Amplifier

This page provides the datasheet information for the EL5167, a member of the EL5166 1.4GHz Current Feedback Amplifier family.

Description

8 LD SOIC 1, 5 2 6 LD SOT-23 5 LD SOT-23 44 PIN NAME NC IN- FUNCTION Not connected Inverting input 3 3 3 IN+ Non-inverting input 4 2 2 VS- Negative supply 6 1 1 OUT Output 7 6 5 VS+ Positive supply 85 CE Chip enable EQUIVALENT CIRCUIT VS+ IN+ IN- (See circuit 1) CIRCUIT 1 VS- VS+ OUT

Features

Gain-of-1 bandwidth = 1.4GHz/gain-of-2 bandwidth = 800MHz.
6000V/µs slew rate.
Single and dual supply operation from 5V to 12V.
Low noise = 1.7nV/√Hz.
8.5mA supply current.
Fast enable/disable (EL5166 only).
600MHz family - (EL5164 and EL5165).
400MHz family - (EL5162 and EL5163).
200MHz family - (EL5160 and EL5161).
Pb-free available (RoHS compliant).

Datasheet Details

Part number	EL5167
Manufacturer	Renesas
File Size	1.09 MB
Description	1.4GHz Current Feedback Amplifier
Datasheet	EL5167 Datasheet
Additional preview pages of the EL5167 datasheet.

📁 Similar Datasheet

EL51 - Output Pentode (Philips)

EL51 - Pentode (ETC)

EL51 - Pentode (Tesla)

EL5100 - 200MHz Slew Enhanced VFA (Intersil Corporation)

EL5101 - 200MHz Slew Enhanced VFA (Intersil Corporation)

EL5102 - Slew Enhanced VFAs (Intersil Corporation)

EL5103 - Slew Enhanced VFAs (Intersil Corporation)

EL511 - PENTODE (MAZDABELVU)

EL5120T - 12MHz Rail-to-Rail Input-Output Operational Amplifier (Intersil)

EL5123 - Rail-to-Rail Input-Output Buffers (Intersil)

Full PDF Text Transcription

Click to expand full text

EL5166, EL5167 1.4GHz Current Feedback Amplifiers with Enable The EL5166 and EL5167 amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at AV = +1 and 800MHz at AV = +2. This makes these amplifiers ideal for today's high speed video and monitor applications, as well as a number of RF and IF frequency designs. With a supply current of just 8.5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption. The EL5166 also incorporates an enable and disable function to reduce the supply current to 13µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier.

Published: May 29, 2020 |