EL5202 Datasheet | Renesas

EL5202, EL5203 400MHz Slew Enhanced VFAs The EL5202 and EL5203 are dual, high-speed VFAs based on a CFA architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the VFA type architecture. With slew rates of 3500V/µs, these devices enable the use of voltage feedback amplifiers in a space where the only alternative has been current feedback amplifiers. This family also includes single, dual, and triple versions with 750MHz bandwidths; please see the EL5104 through EL5304 data sheet for details. Both devices operate on single 5V or ±5V supplies from minimum supply current. The EL5202 also Features an output enable function, which can be used to put the output in to a high-impedance mode. This allows the outputs of multiple amplifiers to be tied together for use in multiplexing applications. Typical applications for these families include cable driving, filtering, A/D and D/A buffering, multiplexing and summing within video, munications, and instrumentation designs. FN7331 Rev 9.00 January 17, 2014 Features - Operates off 3V, 5V, or ±5V supplies - Power-down to 13µA (EL5202) - -3d B bandwidth = 400MHz - ±0.1d B bandwidth = 35MHz - Low supply current = 5m A per amplifier - Slew rate = 3500V/µs - Low offset voltage = 5m V max - Output current = 150m A - AVOL = 2000 - Differential gain/phase = 0.01%/0.01° - Pb-free (Ro HS pliant) Applications - Video amplifiers - PCMCIA applications - A/D drivers - Line drivers - Portable puters - High speed munications - RGB applications - Broadcast equipment - Active filtering FN7331 Rev 9.00 January 17, 2014 Page 1 of...