Datasheet4U Logo Datasheet4U.com

HD74ALVCH162244 - 16-bit Buffers / Drivers

General Description

The HD74ALVCH162244 is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74ALVCH162244 16-bit Buffers / Drivers with 3-state Outputs Hitachi Semiconductor
HD74ALVCH162260 12-bit to 24-bit Multiplexed D-type Latches with 3-state Outputs Hitachi Semiconductor
HD74ALVCH162270 12-bit to 24-bit Registered Bus Exchanger with 3-state Outputs Hitachi Semiconductor
HD74ALVCH162334 16-bit Universal Bus Driver with 3-state Outputs Hitachi Semiconductor
HD74ALVCH162373 16-bit Transparent D-type Latches with 3-state Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74ALVCH162270 12-bit to 24-bit Registered Bus Exchanger
HD74ALVCH16244 16-bit Buffers / Drivers
HD74ALVCH16245 6-bit Bus Transceivers
HD74ALVCH162501 18-bit Universal Bus Transceivers
HD74ALVCH16269 12-bit to 24-bit Registered Bus Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74ALVCH162244 16-bit Buffers / Drivers with 3-state Outputs REJ03D0052-0300Z (Previous ADE-205-173A(Z)) Rev.3.00 Oct.02.2003 Description The HD74ALVCH162244 is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE) inputs. To ensure the high impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current sinking capability of the driver.