HD74ALVCH16831 - 1-to 4 Address Register / Driver

Renesas

General Description

This 1-bit to 4-bit address register / driver is designed for 2.3 V to 3.6 V VCC operation.

The device is ideal for use in applications in which a single address bus is driving four separate memory locations.

📥 Download Datasheet

HD74ALVCH16831 1-to 4 address register / driver by Renesas - Datasheet Preview

Datasheet Details

Part number	HD74ALVCH16831
Manufacturer	Renesas
File Size	2.81 MB
Description	1-to 4 Address Register / Driver
Datasheet	HD74ALVCH16831 Datasheet

📁 Similar Datasheet

Brand Logo	Part Number	Description	Manufacturer
	HD74ALVCH16831	1-to 4 Address Register / Driver with 3-state Outputs	Hitachi Semiconductor

More Datasheets from Renesas

Part Number	Description
HD74ALVCH16820	3.3-V 10-bit Flip Flops
HD74ALVCH16827	20-bit Buffers / Drivers
HD74ALVCH162244	16-bit Buffers / Drivers
HD74ALVCH162270	12-bit to 24-bit Registered Bus Exchanger
HD74ALVCH16244	16-bit Buffers / Drivers
HD74ALVCH16245	6-bit Bus Transceivers
HD74ALVCH162501	18-bit Universal Bus Transceivers
HD74ALVCH16269	12-bit to 24-bit Registered Bus Transceivers
HD74ALVCH162721	3.3-V 20-bit Flip Flops
HD74ALVCH162827	20-bit Buffers / Drivers

Full PDF Text Transcription for HD74ALVCH16831 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for HD74ALVCH16831. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text

HD74ALVCH16831 1-to 4 Address Register / Driver with 3-state Outputs REJ03D0031-0200Z (Previous ADE-205-194(Z)) Rev. 2.00 Oct.02.2003 Description This 1-bit to 4-bit address register / driver is designed for 2.3 V to 3.6 V VCC operation. The device is ideal for use in applications in which a single address bus is driving four separate memory locations. The HD74ALVCH16831 can be used as a buffer or a register, depending on the logic level of the select (SEL) input. When SEL is logic high, the device is in the buffer mode. The outputs follow the inputs and are controlled by the two output enable (OE) controls. Each OE controls two groups of nine outputs. When SEL is logic low, the device is in the register mode. The register is an edge triggered D-type flip flop.