Datasheet4U Logo Datasheet4U.com

HD74LV541A - Octal Buffers / Drivers

General Description

The HD74LV541A has eight line drivers with three state outputs in a 20 pin package.

When OE1 and OE2 is low level, this drivers set up output is enable.

Low-voltage operation is suitable for battery-powered products (e.g., notebook computers), and the low-power consumption extends the battery life.

Key Features

  • VCC = 2.0 V to 5.5 V operation.
  • All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V).
  • All outputs VO (Max. ) = 5.5 V (@VCC = 0 V).
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C).
  • Output current ±8 mA (@VCC = 3.0 V to 3.6 V), ±16 mA (@VCC = 4.5 V to 5.5 V).
  • Ordering Information Part Name Package Type Package Code Package Abbreviation HD74LV541AFPEL SOP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LV541A Octal Buffers / Drivers with 3-state Outputs Hitachi Semiconductor
HD74LV540A Octal Inverted Buffers / Drivers with 3-state Outputs Hitachi Semiconductor
HD74LV573A Octal D-type Transparent Latches with 3-state Outputs Hitachi Semiconductor
HD74LV574A Octal Edge-Triggered D-type Flip-Flops with 3-state Outputs Hitachi Semiconductor
HD74LV595A 8-bit Shift Registers with 3-state Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74LV540A Octal Inverted Buffers / Drivers
HD74LV573A Octal D-type Transparent Latches
HD74LV574A Octal D-type Flip-Flops
HD74LV595A 8-bit Shift Registers
HD74LV00A 2-input NAND Gates

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LV541A Octal Buffers / Drivers with 3-state Outputs REJ03D0213–0200Z (Previous ADE-205-278 (Z)) Rev.2.00 Jun. 28, 2004 Description The HD74LV541A has eight line drivers with three state outputs in a 20 pin package. When OE1 and OE2 is low level, this drivers set up output is enable. Low-voltage operation is suitable for battery-powered products (e.g., notebook computers), and the low-power consumption extends the battery life. Features • VCC = 2.0 V to 5.5 V operation • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) • All outputs VO (Max.) = 5.5 V (@VCC = 0 V) • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) • Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C) • Output current ±8 mA (@VCC = 3.0 V to 3.6 V), ±16 mA (@VCC = 4.5 V to 5.