Datasheet4U Logo Datasheet4U.com

HD74LVC125A - Quad. Bus Buffer Gates

General Description

The HD74LVC125A has four bus buffer gates in a 14 pin package.

The device require the three state control input C to be taken high to put the output into the high impedance condition, whereas the device requires the control input to be low to put the output into high impedance.

Key Features

  • VCC = 2.0 V to 5.5 V.
  • All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V).
  • All outputs VOUT (Max. ) = 5.5 V (@VCC = 0 V or output off state).
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±24 mA (@VCC = 3.0 V to 5.5 V).
  • Ordering Information Part Name Pack.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LVC125A Quad. Bus Buffer Gates with 3-state Outputs Hitachi Semiconductor
HD74LVC138 3-to-8-line Decoder / Demultiplexer Hitachi Semiconductor
HD74LVC139 Dual 2-to-4-line Decoders / Demultiplexers Hitachi Semiconductor
HD74LVC14 Hex Schmitt-trigger Inverters Hitachi Semiconductor
HD74LVC16240A 16-bit Buffers / Line Drivers with 3-state Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74LVC138 3-to-8-line Decoder / Demultiplexer
HD74LVC139 Dual 2-to-4-line Decoders / Demultiplexers
HD74LVC14 Hex Schmitt-trigger Inverters
HD74LVC16240A 16-bit Buffers / Line Drivers
HD74LVC16245A 16-bit Bus Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LVC125A Quad. Bus Buffer Gates with 3-state Outputs REJ03D0348–0400Z (Previous ADE-205-108C (Z)) Rev.4.00 Jul. 23, 2004 Description The HD74LVC125A has four bus buffer gates in a 14 pin package. The device require the three state control input C to be taken high to put the output into the high impedance condition, whereas the device requires the control input to be low to put the output into high impedance. Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • VCC = 2.0 V to 5.5 V • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) • All outputs VOUT (Max.) = 5.5 V (@VCC = 0 V or output off state) • Typical VOL ground bounce < 0.