Datasheet4U Logo Datasheet4U.com

HD74LVC16240A - 16-bit Buffers / Line Drivers

General Description

The HD74LVC16240A has sixteen inverter drivers with three state outputs in a 48 pin package.

This device is a inverting buffer and has two active low enables (1G to 4G).

Each enable independently controls four buffers.

Key Features

  • VCC = 2.0 V to 5.5 V.
  • All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V).
  • All outputs VOUT (Max. ) = 5.5 V (@VCC = 0 V or output off state).
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±24 mA (@VCC = 3.0 V to 5.5 V).
  • Ordering Information Part Name Package Type Package Code HD74LVC16240ATEL TSSOP.
  • 48 pi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LVC16240A 16-bit Buffers / Line Drivers with 3-state Outputs Hitachi Semiconductor
HD74LVC16241 16-bit Buffers / Line Drivers with 3-state Outputs Hitachi Semiconductor
HD74lVC16244A 16-bit Buffers / Line Drivers with 3-state Outputs Hitachi Semiconductor
HD74LVC16245A 16-bit Bus Transceivers with 3-state Outputs Hitachi Semiconductor
HD74LVC16373A 16-bit D-type Transparent Latches with 3-state Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74LVC16245A 16-bit Bus Transceivers
HD74LVC16373A 16-bit D-type Transparent Latches
HD74LVC16374A 16-bit D-type Flip Flops
HD74LVC125A Quad. Bus Buffer Gates
HD74LVC138 3-to-8-line Decoder / Demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LVC16240A 16-bit Buffers / Line Drivers with 3-state Outputs REJ03D0362–0400Z (Previous ADE-205-118B (Z)) Rev.4.00 Jul. 29, 2004 Description The HD74LVC16240A has sixteen inverter drivers with three state outputs in a 48 pin package. This device is a inverting buffer and has two active low enables (1G to 4G). Each enable independently controls four buffers. Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • VCC = 2.0 V to 5.5 V • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) • All outputs VOUT (Max.) = 5.5 V (@VCC = 0 V or output off state) • Typical VOL ground bounce < 0.8 V (@VCC = 3.