Datasheet4U Logo Datasheet4U.com

HIP0060 - 50V Quad Low Side Power Driver

General Description

The HIP0060 is a 5V logic controlled Quad Low Side Power Driver.

The outputs are individually protected for over-current (OC), over-temperature (OT) and over-voltage (OV).

Key Features

  • Quad NDMOS Output Drivers in a High Voltage Power BiMOS Process.
  • Over-Stress Protection - Each Output - Over-Current Limiting.
  • . . . 1.5A Min - Internal Zener Drain-to-Gate Over-Voltage Clamp Protection.
  • . . . 50V Typ - Thermal Shutdown Protection - Open-Load Detection.
  • Low Quiescent Current.
  • . . 10mA Max.
  • Serial Diagnostic Link with SPI Bus.
  • Diagnostic Int.

📥 Download Datasheet

Datasheet Details

Part number HIP0060
Manufacturer Renesas
File Size 427.21 KB
Description 50V Quad Low Side Power Driver
Datasheet download datasheet HIP0060 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control Intersil Corporation
HIP1030 1A High Side Driver with Overload Protection Intersil Corporation
HIP1031 Half Amp High Side Driver with Overload Protection Intersil Corporation
HIP1090 Protected High Side Power Switch with Transient Suppression Intersil Corporation
HIP2106 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver Intersil Corporation

Other Datasheets by Renesas

Part Number Description
HIP0061 3-Transistor Common Source ESD Protected Power MOSFET Array
HIP0045 1A/50V Octal Low Side Power Driver
HIP0050 0.3A/50V Octal Low Side Power Driver
HIP0051 0.25A/50V Octal Low Side Power Driver
HIP0080 Quad Inverting Power Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET HIP0060 1.5A, 50V Quad Low Side Power Driver with Serial Bus Control and Fault Protection FN4045 Rev 0.00 July 1997 Features • Quad NDMOS Output Drivers in a High Voltage Power BiMOS Process • Over-Stress Protection - Each Output - Over-Current Limiting. . . . . . . . . . . . . . . . . . 1.5A Min - Internal Zener Drain-to-Gate Over-Voltage Clamp Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V Typ - Thermal Shutdown Protection - Open-Load Detection • Low Quiescent Current . . . . . . . . . . . . . . . . . 10mA Max • Serial Diagnostic Link with SPI Bus • Diagnostic Interrupt Fault Flag • 5V CMOS Logic Input Control • Common Reset for Fault Bits and Output Drivers • Ambient Operating Temperature Range . . . . . . . . . . . . . . . .