HIP2122 - High Frequency Half-Bridge Driver

Product Overview

Renesas

Part number	HIP2122
Manufacturer	Renesas
File Size	786.13 KB
Description	High Frequency Half-Bridge Driver
Datasheet	HIP2122 Datasheet
Additional preview pages of the HIP2122 datasheet.

1 1 VDD Positive supply voltage for lower gate driver.

Decouple this pin with a ceramic capacitor to VSS.

3 2 HB High-side bootstrap supply voltage referenced to HS.

9 Ld TDFN “B” Package Compliant with 100V Conductor Spacing Guidelines per IPC-2221.
Break-Before-Make Dead-Time Prevents Shoot-through and is adjustable up to 220ns.
Bootstrap Supply Max Voltage to 114VDC.
Wide Supply Voltage Range (8V to 14V).
Supply Undervoltage Protection.
CMOS Compatible Input Thresholds with Hysteresis (HIP2122).
1.6/1 Typical Output Pull-up/Pull-down Resistance.
On-Chip 1Ω Bootstrap Diode Applicati.

📁 Similar Datasheet

HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver (Intersil Corporation)
HIP2500 - Half Bridge 500VDC Driver (Harris Corporation)
HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control (Intersil Corporation)
HIP1030 - 1A High Side Driver with Overload Protection (Intersil Corporation)
HIP1031 - Half Amp High Side Driver with Overload Protection (Intersil Corporation)
HIP1090 - Protected High Side Power Switch with Transient Suppression (Intersil Corporation)
HIP4011 - Three Phase Brushless DC Motor Controller (Intersil Corporation)
HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver (Intersil Corporation)

Other Datasheets by Renesas

Published: May 30, 2020 |