ICL7667 Datasheet | Renesas

Dual Power MOSFET Driver The ICL7667 is a dual monolithic high-speed driver designed to convert TTL level signals into high current outputs at voltages up to 15V. Its high speed and current output enable it to drive large capacitive loads with high slew rates and low propagation delays. With an output voltage swing only millivolts less than the supply voltage and a maximum supply voltage of 15V, the ICL7667 is well suited for driving power MOSFETs in high frequency switched-mode power converters. The ICL7667’s high current outputs minimize power losses in the power MOSFETs by rapidly charging and discharging the gate capacitance. The ICL7667’s inputs are TTL patible and can be directly driven by mon pulse-width modulation control ICs. Ordering Information PART NUMBER (Note) TEMP. PART RANGE MARKING (°C) PKG. PACKAGE DWG. # ICL7667CBA- 7667 CBA (No longer available, remended replacement: ICL7667CBAZA) 0 to 70 8 Ld SOIC (N) M8.15 ICL7667CBAZA 7667 CBAZ 0 to 70 8 Ld SOIC (N) M8.15 (Pb-Free) ICL7667CPA- 7667 CPA 0 to 70 8 Ld PDIP E8.3 ICL7667CPAZ 7667 CPAZ 0 to 70 8 Ld PDIP- - E8.3 (Pb-Free) - Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications. - - Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding pounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. FN2853 Rev 7.00 September 4, 2015 Features - Fast Rise and Fall Times - 30ns with 1000p F Load - Wide 15V Supply Voltage Range - V+ = +4.5V to +15V - V- = -15V to Ground (0V) - Low...