Datasheet4U Logo Datasheet4U.com

ICS1893AF - 3.3-V 10Base-T/100Base-TX Integrated PHYceiver

Key Features

  • Single 3.3V power supply.
  • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.
  • DSP-based baseline wander correction to virtually eliminate killer packets.
  • Low-power, 0.35-micron CMOS (typically 400 mW).
  • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and.

📥 Download Datasheet

Datasheet Details

Part number ICS1893AF
Manufacturer Renesas
File Size 1.27 MB
Description 3.3-V 10Base-T/100Base-TX Integrated PHYceiver
Datasheet download datasheet ICS1893AF Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICS1893AG 3.3V 10Base-T/100Base-TX Integrated PHYceiver Integrated Circuit Systems
ICS1893BF 3.3-V 10Base-T/100Base-TX Integrated PHYceiver IDT
ICS1893BY-10 3.3V 10Base-T/100Base-TX Integrated PHYceiver Integrated Circuit Systems
ICS1893CF 3.3-V 10Base-T/100Base-TX Integrated PHYceiver IDT
ICS1893CY-10 3.3V 10Base-T/100Base-TX Integrated PHYceiver Integrated Circuit Systems

Other Datasheets by Renesas

Part Number Description
ICS1893 3.3-V 10Base-T/100Base-TX Integrated PHYceiver
ICS1894-32 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER
ICS1894-34 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER
ICS1894-34 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER
ICS1894-40 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICS1893AF Document Type: Data Sheet Document Stage: Release 3.3-V 10Base-T/100Base-TX Integrated PHYceiver™ General The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AF uses the same proven silicon as the ICS1893Y-10 but offers a lower cost solution by using a lower cost 300 mil. 48-lead SSOP package. The ICS1893AF uses the same twisted-pair transmit and receive circuits as the ICS1893Y-10, and the same recommended board layout techniques apply to the ICS1893AF. The ICS1893AF is intended for Node applications using the standard MII interface to the MAC.