Renesas Electronics IDT7006L
The IDT7006 is a high-speed 16K x 8 Dual-Port Static RAM. The IDT7006 is designed to be used as a stand-alone 128K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. This device provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory.| Part No. | IDT7006L |
|---|---|
| Datasheet | IDT7006L Download |
| Manufacturer |  Renesas Electronics |
| Description | HIGH-SPEED 16K x 8 DUAL-PORT STATIC RAM |
| Buy | Stock & Price |
FEATURES
● True Dual-Ported memory cells which allow simultaneous reads of the same memory location● High-speed access – Commercial: 15/17/20/25/35/55ns (max.) – Industrial: 20ns (max.) – Military: 20/25/35/55/70ns (max.)
● Low-power operation – IDT7006S Active: 750mW (typ.) Standby: 5mW (typ.) – IDT7006L Active: 700mW (typ.) Standby: 1mW (typ.)
● IDT7006 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading more than one device Functional Block Diagram OEL CEL R/WL
● M/S = H for BUSY output flag on Master, M/S = L for BUSY input on Slave
● Busy and Interrupt Flags
● On-chip port arbitration logic
● Full on-chip hardware support of semaphore signaling between ports
● Fully asynchronous operation from either port
● Devices are capable of withstanding greater than 2001V electrostatic discharge
● Battery backup operation—2V data retention
● TTL-compatible, single 5V (±10%) power supply
● Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin TQ...
