The QS3861 provides a set of ten high-speed CMOS TTL-compatible bus switches.
The low ON resistance (5Ω) of the QS3861 allows inputs to be connected without adding propagation delay and without generating additional ground bounce noise.
The Bus Enable (BE) signal turns the switches on.
Key Features
Enhanced N channel FET with no inherent diode to Vcc.
5Ω bidirectional switches connect inputs to outputs.
Zero propagation delay, zero ground bounce.
Undershoot clamp diodes on all switch and control inputs.
Full PDF Text Transcription for IDTQS3861 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
IDTQS3861. For precise diagrams, and layout, please refer to the original PDF.
IDTQS3861 HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT QUICKSWITCH® PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT INDUSTRIALTEMPERATUR...
View more extracted text
D CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT INDUSTRIALTEMPERATURERANGE IDTQS3861 FEATURES: • Enhanced N channel FET with no inherent diode to Vcc • 5Ω bidirectional switches connect inputs to outputs • Zero propagation delay, zero ground bounce • Undershoot clamp diodes on all switch and control inputs • Available in QSOP and TSSOP packages DESCRIPTION: The QS3861 provides a set of ten high-speed CMOS TTL-compatible bus switches. The low ON resistance (5Ω) of the QS3861 allows inputs to be connected without adding propagation delay and without generating additional ground bounce noise. The Bus Enable (BE) signal turn
IDTQS3861 Datasheet
