Datasheet4U Logo Datasheet4U.com

ISL15102 - PLC Differential Line Driver

General Description

Pin Number 1 2 3, 4, 6, 7, 8, 9, 12, 13, 14, 15, 16, 24 10, 22 5 11, 21 17 18 19 20 23 - Pin Name VINA+ VINB+ NC GND VCM VS+ VOUTB VINBVINAVOUTA DIS Thermal Pad Function Amplifier A non-inverting input Amplifier B non-inverting input No internal connection Ground connection Output common-mode bi

Key Features

  • Single differential driver.
  • Internal VCM.
  • 90MHz signal bandwidth.
  • 900V/µs slew rate.
  • Single +8V to +28V supply, absolute maximum 30V.
  • Supports narrowband and broadband DMT PLC.
  • -86dB THD at 200kHz in to 50Ω line load.
  • -70dB THD at 3MHz in to 50Ω line load.
  • Control pin for enable/disable for TDM operation.
  • Thermal shutdown.

📥 Download Datasheet

Datasheet Details

Part number ISL15102
Manufacturer Renesas
File Size 1.08 MB
Description PLC Differential Line Driver
Datasheet download datasheet ISL15102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL12020 Low Power RTC Intersil Corporation
ISL12021 Real Time Clock Intersil Corporation
ISL12030 Low Power RTC Intersil Corporation
ISL21009MEP High Voltage Input Precision Low Noise FGA Voltage References Intersil Corporation
ISL22316WM Single Digitally Controlled Potentiometer Intersil

Other Datasheets by Renesas

Part Number Description
ISL15100 PLC Differential Line Driver
ISL15110 PLC MIMO Line Driver
ISL1532 Dual Channel Differential DSL Line Driver
ISL1532A Dual Channel Fixed Gain Differential DSL Line Driver
ISL1533 Dual Channel Differential DSL Line Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL15102 Single Port, PLC Differential Line Driver The ISL15102 is a single port differential line driver developed for Power Line Communication (PLC) applications. The device is designed to drive heavy line loads while maintaining a high level of linearity required in Orthogonal Frequency Division Multiplexing (OFDM) PLC modem links. The ISL15102 has a disable control pin (DIS). In Disable mode, the line driver goes into Low Power mode and the outputs maintain a high impedance in the presence of high receive signal amplitude, improving TDM receive signal integrity. The ISL15102 has built-in thermal protection. When the internal temperature reaches +150°C (typical) the driver shuts down to prevent damage to the device.