Datasheet4U Logo Datasheet4U.com

ISL6150 - Negative Voltage Hot Plug Controller

Download the ISL6150 datasheet PDF. This datasheet also covers the ISL6140 variant, as both devices belong to the same negative voltage hot plug controller family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • Low Side External NFET Switch.
  • Operates from -10V to -80V (-100V absolute max rating) or +10V to +80V (+100V absolute max rating).
  • Programmable Inrush Current.
  • Programmable Electronic Circuit Breaker (overcurrent shutdown).
  • Progr.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ISL6140-Renesas.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ISL6150
Manufacturer Renesas
File Size 863.55 KB
Description Negative Voltage Hot Plug Controller
Datasheet download datasheet ISL6150 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL6152 Negative Voltage Hot Plug Controller Intersil Corporation
ISL6142 Negative Voltage Hot Plug Controller Intersil Corporation
ISL6172 Dual Low Voltage Hot Swap Controller Intersil Corporation
ISL60007 High Precision FGA Voltage References Intersil Corporation
ISL6217 Precision Multi-Phase Buck PWM Controller Intersil Corporation

Other Datasheets by Renesas

Part Number Description
ISL6151 Negative Voltage Hot Plug Controller
ISL6111 Current Regulated PCI Hot Plug Power Switch Controller
ISL6112 Dual Slot PCI-Express Hot Plug Controller
ISL6113 Dual Slot PCI-E Hot Plug Controllers
ISL6114 Dual Slot PCI-E Hot Plug Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL6140, ISL6150 Negative Voltage Hot Plug Controller The ISL6140 is an 8 Ld, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass transistor. The pass transistor is turned off if the input voltage is less than the undervoltage threshold, or greater than the overvoltage threshold. A programmable electronic circuit breaker protects the system against shorts. The active low PWRGD signal can be used to directly enable a power module (with a low enable input) The ISL6150 is the same part, but with an active high PWRGD signal. FN9039 Rev 5.