Datasheet4U Logo Datasheet4U.com

ISL8502A - 2A Synchronous Buck Regulator

General Description

” beginning on page 13 for pin descriptions.

TEMP.

PKG.

” suffix for tap

Key Features

  • a bi-directional Enable pin that allows the part to pull the enable pin low during fault detection. PGOOD delay for ISL8502A has been decreased to 1ms typical (at 500kHz switching frequency) compared to 250ms (at 500kHz) for ISL8502. Features.
  • Up to 2A Continuous Output Current.
  • Integrated MOSFETs for Small Regulator Footprint.
  • Adjustable Switching Frequency, 500kHz to 1.2MHz.
  • Tight Output Voltage Regulation, 1% Over-temperature.
  • Wide Input Voltage.

📥 Download Datasheet

Datasheet Details

Part number ISL8502A
Manufacturer Renesas
File Size 731.52 KB
Description 2A Synchronous Buck Regulator
Datasheet download datasheet ISL8502A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL8540 DC/DC Power Switching Regulator Intersil Corporation
ISL8560MR DC/DC Power Switching Regulator Intersil
ISL8563 Transmitters/Receivers Intersil Corporation
ISL8563E Transmitters/Receivers Intersil Corporation
ISL837030 Modem Reference Designs Intersil Corporation

Other Datasheets by Renesas

Part Number Description
ISL8502 2A Synchronous Buck Regulator
ISL8500 2A Standard Buck PWM Regulator
ISL85001 1A Standard Buck PWM Regulator
ISL85003 Highly Efficient 3A Synchronous Buck Regulator
ISL85003A Highly Efficient 3A Synchronous Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL8502A 2A Synchronous Buck Regulator with Integrated MOSFETs FN7940 Rev 0.00 October 21, 2011 The ISL8502A is a synchronous buck controller with internal MOSFETs packaged in a small 4mmx4mm QFN package. The ISL8502A can support a continuous load of 2A and has a very wide input voltage range. With the switching MOSFETs integrated into the IC, the complete regulator footprint can be very small and provide a much more efficient solution than a linear regulator. The ISL8502A is capable of stand-alone operation or it can be used in a master slave combination for multiple outputs that are derived from the same input rail. Multiple slave channels (up to six) can be synchronized. This method minimizes the EMI and beat frequencies effect with multi-channel operation.