ISL9112 Datasheet | Renesas

features that may be accessed using an I2C bus interface. With a programmable output voltage range of 1.9V to 5V, the ISL9112 is ideal for applications requiring dynamically changing supply voltages. A programmable slew rate can be selected to provide smooth transitions between output voltage settings. The ISL9110 and ISL9112 require only a single inductor and very few external ponents. Power supply solution size is minimized by a tiny 3mmx3mm package and a 2.5MHz switching frequency, which further reduces the size of external ponents. FN7649 Rev.3.00 Jul 26, 2018 Features - Accepts input voltages above or below regulated output voltage - Automatic and seamless transitions between Buck and Boost modes - Input voltage range: 1.8V to 5.5V - Output current: Up to 1.2A - High efficiency: Up to 95% - 35µA quiescent current maximizes light-load efficiency - 2.5MHz switching frequency minimizes external ponent size - Selectable Forced PWM mode and external synchronization - I2C Interface (ISL9112) - Fully protected for overcurrent, over-temperature, and undervoltage - Small 3mmx3mm TDFN Package Applications - Regulated 3.3V from a single Li-ion battery - Smart phones and tablet puters - Handheld devices - Point-of-load regulators Related Literature For a full list of related documents, visit our website - ISL9110, ISL9112 product pages VIN = 1.8V TO 5.5V C1 10µF STATUS OUTPUTS ISL9110IRTNZ 5 PVIN LX1 6 VIN 10 MODE 9 EN 8 BAT 7 PG LX2 VOUT 1 FB 12 L1 2.2µH VOUT = 3.3V/1A C2 10µF GND PGND 11 3 FIGURE 1. TYPICAL APPLICATION EFFICIENCY...