ISL9113A Overview
PGND Power ground VOUT Device output NC No connection FB Feedback pin of the converter. Connect voltage divider resistors between VOUT, FB, and GND for desired output. EN The EN pin is an active-HIGH logic input for enabling the device.
ISL9113A Key Features
- Up to 95% efficiency at typical operating conditions
- Input voltage range: 0.8V to 4.7V
- Output current: Up to 500mA (VBAT = 3.0V, VOUT = 5.0V)
- Low quiescent current: 20μA (typical)
- Logic control shutdown (IQ < 1µA)
- 1.2V EN high logic
- Output disconnect during shutdown
- Skip mode under light-load condition
- Undervoltage lockout
- Fault protection: OVP, OTP, short-circuit