Datasheet4U Logo Datasheet4U.com

MK2705 - AUDIO CLOCK SOURCE

General Description

The MK2705 provides synchronous clock generation for audio sampling clock rates derived from an MPEG stream, or can be used as a standalone clock source with a 27 MHz crystal.

Key Features

  • Packaged in 8-pin (150 mil wide) SOIC.
  • Clock or crystal input.
  • Low phase noise.
  • Low jitter.
  • Exact (0 ppm) multiplication ratios.
  • Independent output voltage.
  • Support for 256 times sampling rate Block Diagram VDD VDDO S0 S1 PLL Clock CLK Synthesis X1/REFIN 27 MHz crystal or clock input X2 Crystal Oscillator and Control Circuitry Optional crystal load capacitors GND IDT™ AUDIO CLOCK SOURCE 1 MK2705 REV E 051310 MK2705.

📥 Download Datasheet

Datasheet Details

Part number MK2705
Manufacturer Renesas
File Size 297.81 KB
Description AUDIO CLOCK SOURCE
Datasheet download datasheet MK2705 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MK2703 PLL Audio Clock Synthesizer Integrated Circuit Systems
MK2703B PLL AUDIO CLOCK SYNTHESIZER Integrated Circuit Systems
MK2704 PLL Audio Clock Synthesizer Integrated Circuit Systems
MK2712 NTSC/PAL Clock Integrated Circuit Systems
MK2716 HDTV Clock Synthesizer Integrated Circuit Systems

Other Datasheets by Renesas

Part Number Description
MK2703 PLL AUDIO CLOCK SYNTHESIZER
MK2703B PLL AUDIO CLOCK SYNTHESIZER
MK2712 NTSC/PAL Clock
MK2716 HDTV CLOCK SYNTHESIZER
MK2732-06 LOW PHASE NOISE VCXO AND MULTIPLIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AUDIO CLOCK SOURCE DATASHEET MK2705 Description The MK2705 provides synchronous clock generation for audio sampling clock rates derived from an MPEG stream, or can be used as a standalone clock source with a 27 MHz crystal. The device uses the latest PLL technology to provide good phase noise and long term jitter characteristics in a small 8-pin package. Contact IDT if you have a requirement for an input and output frequency not included in this document.