Renesas Electronics MK2732-06
The MK2732-06 is a low-cost, low-jitter, high-performance VCXO and PLL clock synthesizer designed to replace expensive discrete VCXOs and multipliers. The on-chip Voltage Controlled Crystal Oscillator (VCXO) accepts a 0 to 3 V input voltage to cause the output clocks to vary by ±100 ppm. Key: TI = tri-level input; VI = analog voltage input; XI, XO = crystal pins IDT™ LOW PHASE NOISE VCXO AND MULTIPLIER 2 MK2732-06 REV H 051310 MK2732-06 LOW PHASE NOISE VCXO AND MULTIPLIER VCXO AND SYNTHESIZER External Component Selection The MK2732-06 requires a minimum number of external...| Part No. | MK2732-06 |
|---|---|
| Datasheet | MK2732-06 Download |
| Manufacturer |  Renesas Electronics |
| Description | LOW PHASE NOISE VCXO AND MULTIPLIER |
| Buy | Stock & Price |
DESCRIPTION
Using IDT’s patented VCXO and analog Phase-Locked Loop (PLL) techniques, the device uses an inexpensive 10 MHz to 14 MHz pullable crystal input to produce up to three output clocks. IDT manufactures the largest variety of clocks for Set-top boxes and Communications. Consult IDT to eliminate VCXOs, crystals, oscillators andbuffers from your board. Block DiagramFEATURES
● Packaged in 16-pin TSSOP● Pb (lead) free package
● For xDSL chipsets
● For MPEG2 decoders
● Replaces VCXO and multiplier
● Uses an inexpensive pullable crystal
● On-chip patented VCXO with pull range of 200 ppm (±100 ppm) minimum
● VCXO tuning voltage of 0 to 3 V
● Zero ppm synthesis error in all clocks
● Full CMOS output swings with 25 mA output drive capability at TTL levels
● Advanced, low-power, sub-micron CMOS process
● 5 V operating voltage for core, ability to run output clocks at 3.3 V or 5 V for easy interface.
● Available in commercial and industrial temperature versions VDD5 VDDIO S1, S0 VIN 10...
