MPC94551 Overview
A 33 series terminating resistor may be used on each clock output if the trace is longer than 1 inch. A decoupling capacitor of 0.01 F should be connected between VDD on pin 7 and GND on pin 6, as close to the device as possible. Stresses above the ratings listed below can cause permanent damage to the device.
MPC94551 Key Features
- 1:4 CMOS fanout buffer
- 300 ps output to output skew
- I/O frequency up to 160 MHz operation
- Non-inverting output clock
- 3.3 V supply voltage
- Output Enable mode tri-states outputs
- 40°C to 85°C industrial temperature range
- 8-lead SOIC package, Pb-free
- For drop in replacement use 551MI
