P9028AC
P9028AC is Dual-Mode WPC/PMA 5 Watt Wireless Power Receiver manufactured by Renesas.
DRAFT
Dual-Mode WPC/PMA 5 Watt Wireless Power Receiver IC
Features
- Single Chip Receiver (Rx) Solution
- WPC v1.1.2 pliant
- PMA v1, v3 Pre-Release patible with Options
- Advanced WPC v1.1.2 Foreign Object Detection (FOD)
- Programmable FOD setting via external resistor and
I2C registers
- Programmable current limit via external resistor
- Integrated Full-Bridge Synchronous Rectifier
- Integrated 5V @ 1A LDO Regulator Output
- Closed-loop power transfer control between TX and
- I2C interface provides VRECT, Iout and switching frequency values
- Open-Drain LED Indicator Output
- Over-Temperature/Voltage/Current Protection
Applications
- WPC-pliant and PMA-patible Wireless Chargers for Mobile Applications.
- Cellular Mobile Phones
- Tablets, DSC, DVC and Handhelds
Product Datasheet
Introduction
The P9028AC is an integrated single-chip, dual-mode WPC v1.1.2-pliant and PMA v1.0-patible, wireless power receiver IC with advanced WPC v1.1.2 Foreign Object Detection (FOD). The device operates with an AC power signal from a resonant tank and converts it into a regulated 5V output voltage, which can be used to supply power to a mobile application. It includes a high efficiency Synchronous Full Bridge Rectifier and 5V tracking LDO output stage. The P9028AC dual-mode operation automatically detects the transmitter type and initiates either WPC or PMA AC modulation munication protocols with optimal efficiency.
The device includes the control circuit required to modulate the load to transmit WPC-pliant or PMA-patible message packets to the base station. It uses minimal external ponents to reduce overall solution area.
The P9028AC employs advanced programmable WPC FOD techniques to detect foreign metallic objects placed on the transmitter base station derived from a transmitted and received power transfer algorithm.
The P9028AC is available in a 36 ball 3mm X 3mm WLCSP or 32 pin 5mm X 5mm TQFN package.
Typical Application...
