RRP51035 Datasheet | Renesas

features a ±1% output voltage accuracy, input voltage, and BIAS voltage UVLO with hysteresis, enable control, internal current limit, over-temperature shutdown protection with hysteresis, power-good indication, voltage BIAS pin, and fast-start up. The RRP51035 is stable with a minimum 22µF ceramic output capacitor and is available in a 20-Ld 3.5mm×3.5mm QFN package. Features - Maximum dropout: 180m V at 3A with BIAS - Output voltage accuracy: ±1% - Ultra-low output noise: 7µVRMS - Input voltage range: - Without BIAS: 1.4V to 6.5V - With BIAS: 1.1V to 6.5V - Output voltage range: - Using PCB layout and voltage set pins: 0.5V to 2.075V - External FB resistors: 0.5V to 5.1V - BIAS voltage range: 3V to 6.5V - Max operating load current: 3A - High PSRR at VHEADROOM = 0.5V - 100k HZ: 35d B at 3A - Enable control and power-good indication - Overcurrent, short-circuit, and over-temperature fault protection - Excellent load transient response Applications - Sensor, imaging, and radar - Test and measurement - Instrumentation, medical, and audio - RF power supplies VIN 10µF VBIAS C (optional) 1µF 10µF EN RRP 51035 CNR/SS VBIAS 0.8V VO UT SNS FB PG 25m V VIN VIN GND VO UT VO UT 10kΩ 22µF VOUT, IOUT (MAX) 3A C (optional) 400m V 200m V GND 100m V 50m...