SLG46585 Datasheet | Renesas

Description The SLG46585 is a small, low power ponent monly used to integrate Mixed-Signal functions under control of an asynchronous state machine. The user creates the circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins, and the macrocells of the SLG46585. In addition, the device contains one 1 A DC/ DC buck converter operating from 1 MHz to 2 MHz and four 150 m A configurable LDOs. This highly versatile device allows a wide variety of functions and control logic to be designed within a very small, low power monolithic integrated circuit. Key Features - Four Analog parators - Voltage Reference for Analog parators - Analog Temperature Sensor - Fifteen bination Function Macrocells - Three Selectable DFF/LATCH or 2-bit LUTs - Six Selectable DFF/LATCH or 3-bit LUTs - One Selectable Pipe Delay or Ripple Counter, or 3-bit - Five 8-bit Delays/Counters or 3-bit LUTs - binatorial Logic - One 4-bit LUT with Two Outputs - Programmable Asynchronous State Machine - Eight States - Flexible Input Logic from State Transitions - Real Time Clock Binary Counter - Four Tri-Mode 150 m A LDO Regulators - High Power Mode (HP Mode): 150 m A Output - Low Power Mode (LP Mode): 100 µA Output - Power Switch Mode: Acts like a Load Switch - 1 A Synchronous Constant-on-Time DC/DC Step Down Converter - Serial munications - I2C Slave Protocol Interface - Programmable Delay with Edge Detector Output - Additional Logic Functions - 2 Deglitch Filters with Edge Detectors - Two Oscillators - Configurable 25 k Hz/2 MHz - 1.73 k Hz Low Power Oscillator - Eight Byte RAM + OTP User Memory - RAM with I2C interface - User Defined Initial Values Transferred from OTP - Power-On Reset - Highly Versatile Macrocells - Read Back Protection (Read Lock) - 2.5 V to 5.5 V Supply - Operating Temperature Range: -40 °C to 85 °C - Ro HS pliant/Halogen-Free...