SLG46867 Datasheet | Renesas

Description The SLG46867 provides a small, low power ponent for monly used Mixed-Signal functions. The user creates their circuit design by programming the one time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins, and the macrocells of the SLG46867. This highly versatile device allows a wide variety of Mixed-Signal functions to be designed within a very small, low power single integrated circuit. Key Features - Two High Speed General Purpose Analog parators (ACMPx H) - Two Low Power General Purpose Analog parators (ACMPx L) - Two Voltage References (Vref) - Two Vref Outputs - Fifteen bination Function Macrocells - Three Selectable DFF/LATCH or 2-bit LUTs - One Selectable Programmable Pattern Generator or 2-bit LUT - Nine Selectable DFF/LATCH or 3-bit LUTs - One Selectable Pipe Delay or Ripple Counter, or 3-bit LUT - One Selectable DFF/LATCH or 4-bit LUTs - Eight Multi-Function Macrocells - Seven Selectable DFF/LATCH or 3-bit LUTs + 8-bit Delay/Counters - One Selectable DFF/LATCH or 4-bit LUT + 16-bit Delay/Counter - Serial munications - I2C Protocol Interface - Programmable Delay with Edge Detector Output - Deglitch Filter or Edge Detector - Three Oscillators (OSC) - 2.048 k Hz Oscillator - 2.048 MHz Oscillator - 25 MHz Oscillator Applications - Power Sequencing with plex Analog Control - Power Plane ponent Size Reduction Project - Consumer Electronics - LED Driver - Haptic Motor Driver - System RESET with Power Switch - Analog Temperature Sensor - Power-On Reset (POR) - Dual P-FET Power Switch - Read Back Protection (Read Lock) - Power Supply - 2.5 V (±8 %) to 5 V (±10 %) - Operating Temperature Range: -40 °C to 85 °C - Ro HS pliant/Halogen-Free/Pb-Free - Available...