SLG59M1614V Datasheet | Renesas

Description The SLG59M1614V is a high performance 8.5 mΩ, 4 A single-channel n FET load switch which can operate with a 2.5 V to 5.5 V VDD supply to switch power rails from as low as 0.85 V up to the supply voltage. The SLG59M1614V incorporates two-level overload current protection, thermal shutdown protection, and inrush current control which can easily be adjusted by a small external capacitor. Using a proprietary MOSFET design, the SLG59M1614V achieves a stable 8.5 mΩ RDSON across a wide input voltage range. In addition, the SLG59M1614V’s package also exhibits low thermal resistance for high-current operation using Renesas’s advanced assembly technology. Fully specified over the -40 °C to 85 °C temperature range, the SLG59M1614V is packaged in a space-efficient, low thermal resistance, Ro HS-pliant 1.5 mm x 2.0 mm STDFN package. Features - 1.5 x 2.0 mm FC-TDFN 8L package (2 fused pins for drain and 2 fused pins for source) - Logic level ON pin capable of supporting 0.85 V CMOS Logic - User selectable ramp rate with external capacitor - 8.5 mΩ RDSON while supporting 4 A - Discharges load when off - Two Over Current Protection Modes - Short Circuit Current Limit - Active Current Limit - Over Temperature Protection - Pb-Free / Halogen-Free / Ro HS pliant - Operating Temperature: -40 °C to 85°C - Operating Voltage: 2.5 V to 5.5 V Pin Configuration VDD 1 ON 2 D3 D4 8 GND 7 CAP 6S 5S 8-pin FC-TDFN (Top View) Applications - Notebook Power Rail Switching - Tablet Power Rail Switching - Smartphone Power Rail Switching Block Diagram +2.5 V to 5.5 V CSLEW 4 n F Charge Pump 4 A @ 8.5 mΩ Linear Ramp Control Over Current and Over Temperature Protection S CLOAD CMOS...