SLG59M1641V Datasheet | Renesas

Description The SLG59M1641V is a dual-channel, 45 mΩ p FET load switch designed to switch 1.5 V to 5.5 V power rails up to 2 A in each channel. When either channel is enabled, reverse-current protection will quickly open the switch in the event of a reverse-voltage condition is detected (a VOUT > VIN + 50 m V condition opens the switch). In the event that the channel’s VIN voltage is too low, the load switch also contains an internal VIN(UVLO) threshold monitor to keep or to turn the switch OFF. Each load switch is independently controlled via its own low-voltage patible CMOS input. Designed to operate over a -40°C to 85°C range, the SLG59M1641V is available in a Ro HS-pliant, ultra-small 1.6 x 1.0 mm STDFN package. Features - Integrated 2-Channel p FET Load Switch - 2 A Maximum Continuous Switch Current per Channel - Low Typical RDSON: - 45 mΩ at VIN = 5 V - 60 mΩ at VIN = 2.5 V - 80 mΩ at VIN = 1.5 V - Operating Voltage: 1.5 V to 5.5 V - Reverse-current/voltage Protection - Low-voltage CMOS Logic patible Switch Control - Operating temperature range: -40°C to 85°C - Pb-Free / Halogen-Free / Ro HS pliant packaging Pin Configuration VIN2 VOUT2 ON2 ON1 VIN1 VOUT1 8-pin STDFN (Top View) Applications - Power-Rail Switching: - Notebook/Laptop/Tablet PCs - Smartphones/Wireless Handsets - High-definition Digital Cameras - Set-top Boxes - Point of Sales Pins - GPS Navigation Devices Block Diagram VIN1 ILOAD1 Reverse Voltage Protection VOUT1...