Datasheet4U Logo Datasheet4U.com

SLG59M1714V - 4A Load Switch

General Description

Operating from a 2.5 V to 5.5 V power supply, the SLG59M1714V is a 15 mΩ, 4 A single-channel load switch with back-to-back reverse-current blocking when the load switch is disabled.

With a fixed VOUT slew rate of 2.8 V/ms, inrush current is internally limited.

Key Features

  • Low RDSON nFET Block: 15 mΩ.
  • Back-to-back Reverse-current Blocking (when OFF).
  • Maximum Continuous Switch Current: Up to 4 A.
  • Supply Voltage: 2.5 V ≤ VDD ≤ 5.5 V.
  • Wide Input Voltage Range: 0.8 V ≤ VIN ≤ VDD.
  • Fixed VOUT Slew Rate: 2.8 V/ms.
  • Two-stage Overcurrent Protection:.
  • Resistor-adjustable Active Current Limit.
  • Fixed 0.5 A Short-circuit Current Limit.
  • Thermal Shutdown Protection.
  • Analog MOSFET.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SLG59M1714V  A Reverse-current Blocking, 15 mΩ, 4 A Load Switch with Analog Current Monitor Output General Description Operating from a 2.5 V to 5.5 V power supply, the SLG59M1714V is a 15 mΩ, 4 A single-channel load switch with back-to-back reverse-current blocking when the load switch is disabled. With a fixed VOUT slew rate of 2.8 V/ms, inrush current is internally limited. Incorporating two-stage current protection as well as thermal protection and fault signaling, the SLG59M1714V is designed for all 0.8 V to 5.5 V power rail applications. Fully specified over the -40 °C to 85 °C temperature range, the SLG59M1714V is packaged in a space-efficient, low thermal resistance 1.6 mm x 2.5 mm STQFN package.