ZWIR4532 Datasheet | Renesas

Low Power 6Lo WPAN munication Module ZWIR4532 Datasheet Description The ZWIR4532 is a programmable low-power secure IPv6 munication module for Internet-of-things (IOT) device networks. Sensors and devices can operate autonomously or connect to local or global IPv6 networks using the ZWIR4532. The ZWIR4532 serves as a universal secure radio munication module for applications with low-bandwidth requirements. The module incorporates an ultra-low-power ARM® Cortex™-M0+ 32-bit microcontroller that runs the network stack. In addition, the user application can run on the microcontroller. This helps minimize the size, plexity, and overall BOM. A rich set of digital and analog peripherals is available for interfacing with external application ponents. Approximately 128k B of flash and 4k B of RAM are available for user applications. IDT offers the Sensor Share TM user programmable royalty-free 6Lo WPAN network stack with mesh routing capability for the ZWIR4532. 6Lo WPAN is an Internet Engineering Task Force (IETF) standard for wireless low-power IPv6-based sensor and device networks. Secure munication is provided by a standard-pliant implementation of the Internet Protocol Security (IPSec) protocol suite. Typical Applications - Industrial automation - Home and building automation - Health monitoring - Telemetry Features - License-free 868/915 MHz frequency bands - 4 channels in EU frequency band (865.3 to 868.3 MHz) - 10 channels in US frequency band (906 to 924 MHz) - BPSK or O-QPSK modulation selectable - BPSK with 20k Bps EU and 40k Bps US - ARM® Cortex™-M0+ 32-bit ultra-low-power microcontroller - 192k B flash and 20k B RAM - 6 Kbyte EEPROM - 5 UART interfaces - 1 SPI interface - 3 I2C interfaces - 10 pulse-width-modulation (PWM) outputs - 12-bit ADC with 10 input channels - 2 analog parators - 31 general purpose I/O (GPIO) pins - Network Stack - UDP/IPv6...