Datasheet4U Logo Datasheet4U.com

RT9703 - Smart Universal Power Switch

General Description

The RT9703 is a low voltage, high performance single N-Channel MOSFET power switch, designed for power rail on/off control with low R DS(ON) ≈ dd 80m Ω and full protection functions.

Key Features

  • include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, a precision resistor-programmable output current limit up to 3.5A. Besides, the lower quiescent current as 30µA making this device ideal for portable battery-operated equipment. The RT9703 is available in SOP-8 package requiring minimum board spa.

📥 Download Datasheet

Datasheet Details

Part number RT9703
Manufacturer Richtek
File Size 395.58 KB
Description Smart Universal Power Switch
Datasheet download datasheet RT9703 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RT9711 1.5A High-Side Power Switches Richtek Technology Corporation
RT9711A 1.5A/0.6A High-Side Power Switches Richtek Technology Corporation
RT9711B 1.5A/0.6A High-Side Power Switches Richtek Technology Corporation
RT9712 1A/1.5A High-Side Dual Power Switches Richtek Technology Corporation
RT9718 Over Voltage Protection Richtek Technology Corporation

Other Datasheets by Richtek

Part Number Description
RT9701 Power Distribution Switches
RT9702 500mA/1.1A High Side Power Switches
RT9702A 500mA/1.1A High Side Power Switches
RT9705 1A Power Multiplexer
RT9705A 1A Power Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Preliminary RT9703 80mΩ, 3A Smart Universal Power Switch with Flag General Description The RT9703 is a low voltage, high performance single N-Channel MOSFET power switch, designed for power rail on/off control with low R DS(ON) ≈ dd 80m Ω and full protection functions. The RT9703 equipped with a charge pump circuitry to drive the internal MOSFET switch and a flag output is available to indicate fault conditions against large di/dt which may cause the supply to fall out of regulation. In order to fit different application, an IP pin is offered for current limit point setting, a resistor from IP to ground sets the current limit for the switch.