Datasheet4U Logo Datasheet4U.com

RT5006 - Single Output LNB Power Supply Controller

General Description

The RT5006 is a highly integrated voltage regulator and interface IC, specifically designed for supplying power and control signals from advanced satellite Set-Top Box (STB) modules to the Low Noise Block (LNB) down converter in the antenna dish or to the multi-switch box.

Key Features

  • Wide Input Supply Voltage Range : 8V to 16V.
  • Output Current Up to 700mA.
  • Output Current Limit of 800mA with 5ms Timer.
  • LNB Voltages (16 Programmable Levels).
  • ±4.5% High Accuracy of LNB Voltage for 0mA to 500mA Current Output.
  • Fault Latch for OTP, OCP, UVLO.
  • Built-in 22kHz Tone Generator One-Way DiSEqCTM Communication.
  • Four Methods of 22kHz Tone Generation, via I2C Data Bits and/or External Pin.
  • Adjustable Rising/Falling Time via External Capacitor.

📥 Download Datasheet

Datasheet Details

Part number RT5006
Manufacturer Richtek
File Size 331.33 KB
Description Single Output LNB Power Supply Controller
Datasheet download datasheet RT5006 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RT5000H Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5000L Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5000S Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5350 Mini PCI Express Wireless-Module Ralink
RT5370 highly integrated MAC/BBP and 2.4-GHz RF/PA/LNA Ralink

Other Datasheets by Richtek

Part Number Description
RT5002 7 + 1 Channel DC/DC PMU
RT5002C 7 + 1 Channel DC/DC PMU
RT5007 Single Output LNB Power Supply Controller
RT5014 7+6 Channels Power Management
RT5016C Programmable Multi-Channel PMU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® RT5006 Single Output LNB Power Supply Controller with I2C Interface General Description The RT5006 is a highly integrated voltage regulator and interface IC, specifically designed for supplying power and control signals from advanced satellite Set-Top Box (STB) modules to the Low Noise Block (LNB) down converter in the antenna dish or to the multi-switch box. The device consists of an independent current-mode Boost controller and a low dropout linear regulator and the circuitry required for 22kHz tone generation and integrates tone detection capability, to support full one-way DiSEqCTM communications. All the functions and the LNB output voltages (16 programmable levels) can be controlled via the I2C bus.