Datasheet4U Logo Datasheet4U.com

RT6032A - 4-CH Constant Current LED Driver

General Description

The RT6032A is a 4-CH constant current sink LED drivers with Dynamic Headroom Control (DHC) function.

RT6032A can provide well current matching ability, adjustable VSET to choose the suitable dropout voltage across the MOS / BTJ.

Key Features

  • include Short LED Protection (SLP), Open LED Protection (OLP) and Over Temperature Protection (OTP). When any channel triggers protection function, LED will be turned off and the FAULT pin will pull low. The RT6032A is available in SOP-16 package to achieve optimized solution for PCB space. Simplified.

📥 Download Datasheet

Datasheet Details

Part number RT6032A
Manufacturer Richtek
File Size 231.88 KB
Description 4-CH Constant Current LED Driver
Datasheet download datasheet RT6032A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RT600 Dual-core microcontroller NXP
RT6105X NPN SILICON RF POWER TRANSISTOR Advanced Semiconductor
RT6200G 600mA Synchronous Step-down DCDC Converter tokmas
RT6206 300mA LDO LINEAR VOLTAGE/REGULATORS Racetek
RT6588 REMOTE CONTROL ENCODER AND DECODER PAIRED Rato

Other Datasheets by Richtek

Part Number Description
RT6032 4-CH Constant Current LED Driver
RT6030 4-CH LED Current Source Controller
RT6033 4-CH Constant Current LED Driver
RT6033A 4-CH Constant Current LED Driver
RT6050 High-Side Measurement Current Shunt Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® RT6032A 4-CH Constant Current LED Driver for Display Backlight General Description The RT6032A is a 4-CH constant current sink LED drivers with Dynamic Headroom Control (DHC) function. RT6032A can provide well current matching ability, adjustable VSET to choose the suitable dropout voltage across the MOS / BTJ. Beside that, DHC will provide the stable VFB dimming, thus voltage ripple is kept as small even during the dimming. The RT6032A provides four channel constant currents with less than 3% differences in output current value among the 4-CH and ICs respectively. The constant current is adjustable by each channel external resistor (RISET). The LED brightness can also be adjusted via the EN/PWM pin with PWM dimming duty from 1% to 100%.