RTQ2130B-QT Datasheet | Richtek

Description The RTQ2130B is a 0.7A, high-efficiency, current mode synchronous step-down converter which is optimized for automotive applications. The device operates with input voltages from 3V to 36V and is protected from load dump transients up to 42V, eases input surge protection design. The device can program the output voltage between 0.8V to VIN. The peak current mode control with simple external pensation allows the use of small inductors and results in fast transient response and good loop stability. The RTQ2130B provides plete protection functions such as input under voltage lockout, output under voltage protection, over current protection, and thermal shutdown. Cycle-by-cycle current limit provides protection against shorted outputs and soft-start eliminates input current surge during start-up. The RTQ2130B is available in WDFN-8SL 2x3 package. The remended junction temperature range is - 40°C to 150°C. Applications - Automotive Systems - Car Camera Module and Car Cockpit Systems - Connected Car Systems - Point of Load Regulator in Distributed Power Systems - Digital Set Top Boxes - Broadband munications Pin Configuration (TOP VIEW) VIN 1 BOOT 2 SW 3 GND 4 8 VCC 7 EN 6 FB/VS 9 5 P Features - AEC-Q100 Grade 1 Qualified - Wide Input Voltage Range  4V to 36V  3V to 36V (soft-start is finished) - Tight Switching Frequency Variation 2.1MHz ±10% Over Operating Ambient Temperature - 5V Fixed Output Voltage (see Ordering Information for availability) - Maximum Output Current : 0.7A - Peak Current Mode Control - Integrated 200mΩ Switch and 160mΩ Synchronous Rectifier - Enable Control - 0.8V ±1.5% Reference Voltage Accuracy - Adjacent Pin-Short Protection - Built-In UVLO, UVP, OTP - Junction Temperature Range : - 40°C to 150°C Ordering Information RTQ2130B (- ) -QT Grade QT: AEC-Q100 Qualified Package Type QW : WDFN-8SL 2x3 (W-Type) Lead Plating System G: Richtek Green Policy pliant Fixed Output Voltage 50: 5V Note : Richtek products are Richtek Green...