SN18400P Datasheet | Richtek

Description The SN18400P is an I2C interface programmable power management IC. The IC includes two synchronous AVDD/VGH boost converter, a two RESET function, a low dropout LDO, a VGL charge pump, a high performance V with 7-bit Calibrator, 2-CH gamma, and a voltage detector. With available in a UQFN-28L 3.5x3.5 (FC) package, this device is suitable for TFT-LCD panel. The IC can operate from 2.5V to 5V input voltages. High frequency operation allows a pact PCB circuit area with small inductors and capacitor. Current-limit functions are provided for all internal-switch converters, and output-fault shutdown protects all converters against output-fault conditions. Programmable soft-start functions for all output voltage to limit input inrush current during startup. Ordering and Marking Information Part No. SN18400P Marking Information 1Q= Package Type UQFN-28L 3.5x3.5 (FC) (U- type) Pin Configuration (TOP VIEW) Features - 2.5V to 5V Input Supply Voltage - I2C Interface - AVDD Current-Mode Sync. Boost Converter - Programmable Output Voltage 7V to 13.5V - High Efficiency (96%) - Operational Amplifier - 150m A Short Circuit Current - Programmable 7-Bit V Calibrator - Low Dropout Voltage Linear Regulator - Programmable Output Voltage 1.8V to 2.8V - 100m A Maximum Output Current - VCORE/VIO Programmable Sync. Buck - VCORE Programmable Output Voltage 0.8V to 2V - VIO Programmable Output Voltage 1V to 2.8V - VGH Current-Mode Sync. Boost Converter - Negative Charge Pump Regulator with Internal Switch - VGL Programmable Output Voltage - 4.4V to - 13V - Programmable 2-CH Gamma - Programmable Voltage Detector - Over-Temperature Protection - Ro HS pliant and Halogen Free Applications - Tablet Panels - Notebook Panels LDO GMA2 PGND HAVDD GMA1 V OPAS 28 27 26 25 24 23 22 VCORE 1 PGND 2 LXB1 3 VIN 4 LXB2 5 PGND 6 VIO...