Datasheet Details
| Part number | BA5210FS |
|---|---|
| Manufacturer | ROHM |
| File Size | 136.03 KB |
| Description | Speaker / headphone switch power amplifier |
| Datasheet | BA5210FS_Rohm.pdf |
|
|
Overview: Audio ICs Speaker / headphone switch power amplifier BA5210FS The BA5210FS is a power amplifier with a built-in monaural speaker / stereo headphone switch. The speaker drive is BTL for large output, and when the headphones are connected, the “center-amp” design means that coupling is not required. This significantly reduces the number of external ponents required, and makes this IC ideal for pact sets that have high ponent density. Mute and standby functions are provided, and direct microprocessor control is possible.
| Part number | BA5210FS |
|---|---|
| Manufacturer | ROHM |
| File Size | 136.03 KB |
| Description | Speaker / headphone switch power amplifier |
| Datasheet | BA5210FS_Rohm.pdf |
|
|
|
s BA5210FS 512 Audio ICs BA5210FS 513 Audio ICs BA5210FS FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 3.3V RL = 8Ω, f= 1kHz and Rg = 600Ω) 514 Audio ICs FMeasurement circuit BA5210FS FApplication example 515 Audio ICs FOperation notes A characteristic of this IC is that if it is used with a supply voltage that is less than the remended value (2.5V), the OUT-R offset increases.
When using the IC with a BTL 8Ω load, if the voltage drops, the supply current will increase acpanied by an increase in power supply impedance, which can lead to low-frequency blocking oscillation.
For this reason, we remend that you use a low-voltage detection circuit that puts the IC in the standby state when the voltage drops below 2.5V.
| Part Number | Description |
|---|---|
| BA5204F | 3V / 35mW dual power amplifier |
| BA5206BF | 3V 64mW Dual Power Amplifier |
| BA5208AF | 3V 400MW BTL POWER AMPLIFIER |
| BA524 | Power Amplifier |
| BA526 | 6V/430mW single-channel power amplifier |
| BA50BC0FP | 1.0A Low-Dropout Voltage Regulator |
| BA50BC0T | 1A Variable/Fixed Output LDO Regulators |
| BA50BC0WFP | 1A Secondary LDO Regulators |
| BA50BC0WFP-E2 | 1A Variable/Fixed Output LDO Regulators |
| BA50BC0WT | 1A Variable/Fixed Output LDO Regulators |