Datasheet4U Logo Datasheet4U.com

BA6239A - 2-channel reversible motor driver

Datasheet Summary

Features

  • 1) Two reversible-motor driver circuits are built in. (not operable at the same time) 2) Limited number of external parts. 3) Interface with CMOS devices. (protective resistor required when the CMOS output is higher than 5V) FBlock diagram 4) Built-in power transistor for motor driving. 5) Built-in thermal shutdown circuit. (the circuit brakes the output when the chip temperature is increased due to such an event as motor locking) 490 Motor driver ICs FAbsolute maximum ratings (Ta = 25_C) BA6.

📥 Download Datasheet

Datasheet preview – BA6239A

Datasheet Details

Part number BA6239A
Manufacturer ROHM
File Size 151.49 KB
Description 2-channel reversible motor driver
Datasheet download datasheet BA6239A Datasheet
Additional preview pages of the BA6239A datasheet.

📁 Similar Datasheet

  • BA6208 - REVERSIBLE MOTOR DRIVER (UTC)
  • BA6220 - GENERAL USE ELECTRONIC GOVERNOR (UTC)
  • BA601N - SMD Gas Discharge Tube (Bencent)
  • BA604 - SURFACE MOUNT FAST SWITCHING DIODE (Sunmate)
  • BA604 - Small Signal Switching Diode (Vishay)
  • BA604 - Silicon Planar Diode (TEMIC)
  • BA6104 - LED Level Meter Driver (ROHM Electronics)
  • BA6121 - 4-Output Switching Regulator (ROHM Electronics)
  • BA6125 - 5-Point LED Linear Level Meter Driver (ETC)
  • BA6334 - IC for 16 Operation Mode Detector (ROHM Electronics)
Other Datasheets by Rohm
  • BA6239AN - 2-channel reversible motor driver
  • BA6235F - 3V electronic governor
  • BA6238A - 1.0A or More Reversible Motor Drivers
  • BA6238AN - 2-channel reversible motor driver
  • BA6208 - Reversible motor driver
  • BA6208F - Reversible motor driver
  • BA6209 - Reversible motor driver
  • BA6209N - Reversible motor driver

Full PDF Text Transcription

Click to expand full text
Motor driver ICs 2-channel reversible motor driver BA6238A / BA6238AN / BA6239A / BA6239AN The BA6238A, BA6238AN, BA6239A, and BA6239AN are monolithic ICs incorporating two reversible-motor drivers that are suitable for driving small DC brush motors. The logic input section for controlling each motor can be easily connected with CMOSs and other control logic outputs. The torque during loading can be varied by controlling the voltage supplied to the motor with pin 8 of the output section. With a limited number of external parts, each driver has a function of two reversible-motor drivers. FApplications VCRs and audio tape recorders FFeatures 1) Two reversible-motor driver circuits are built in. (not operable at the same time) 2) Limited number of external parts.
Published: |