BA8201F Datasheet | ROHM

munication ICs Pseudo inductance for telephones BA8201 / BA8201F The BA8201 and BA8201F are ICs with a choke coil action, capable of extracting the DC current from a telephone line while maintaining a high inductance on the telephone line side. This eliminates the need for a choke coil, and facilitates use of the telephone set line in a variety of applications. FApplications Household telephones FFeatures 1) Corresponds to choke coil of several henries. 2) Extracts DC current while maintaining high inductance on telephone line side. 3) Capable of extracting large output current. 4) Wide dynamic range. 5) Two output voltage modes available for selection. S Line voltage seek mode S Constant voltage mode 6) DIP 8 and SOP 8 pin packages available. FAbsolute maximum ratings (Ta = 25_C) FRemended operating conditions (Ta = 25_C) 300 munication ICs FBlock diagram BA8201 / BA8201F 301 munication ICs FPin descriptions BA8201 / BA8201F 302 munication ICs BA8201 / BA8201F FElectrical characteristics (unless otherwise noted, Ta = 25_C, VLN = 4V, υLN = 100m Vrms, Io = 5m A, f = 1k Hz) FMeasurement circuits 303 munication ICs BA8201 / BA8201F 304 munication ICs FApplication example BA8201 / BA8201F FAttached ponents C1: This is a capacitor for phase pensation, and is normally connected at 68p F. C2: This is a coupling capacitor. The inductance from the telephone line changes based on this value. Normally, a value of 2.2µF to 10µF is appropriate. C3: This is a capacitor for phase pensation, and is normally connected at 47p F. C4: This is the capacitor for balancing the output. It suppresses rippling in the output and also carries out decoupling for the bias voltage supply of the IF pin. It should be adjusted based on the output current, load, and other factors. R1: Bias is applied from this pin to the IF pin. The inductance from the telephone line changes based on this value. Normally, a value of 100kΩ is appropriate. R2: This can be connected between Pins 6...