Datasheet4U Logo Datasheet4U.com

BD1HC500FVM-C Datasheet 1ch High-side Switch

Manufacturer: ROHM

Overview: Datasheet Automotive IPS series 1ch High-side switch BD1Hx500.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

BD1HC/D500 Series is an Automotive 1ch High-Side switch.

It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection.

Application ■ For automotive (Air conditioner, body equipment, and meter, etc.) Typical Application Circuit Product Summary Operating voltage On-state resistance (25°C, Typ) Overcurrent limit (Typ) Active clamp energy (25°C) 4V to 18V 500mΩ 1.45A 33mJ Package HTSOP-J8 HSON8 MSOP8 4.90mm x 6.00mm x 1.00mm 2.90mm x 3.00mm x 0.60mm 2.90mm x 4.00mm x 0.90mm HTSOP-J8 HSON 8 MSOP 8 ○Product structure:Silicon monolithic integrated circuit www.rohm.com © 2015 ROHM Co., Ltd.

Key Features

  • Built-in overcurrent protection circuit.
  • Built-in Thermal Shut Down(TSD).
  • Built-in Open Load Detection circuit(When Output is OFF).
  • Possibility to control directly from CMOS logic IC.
  • Low standby current.
  • Built-in Under Voltage Lock Out circuit.
  • Built-in diagnostic(ST) output function.
  • Low On resistance of RDS(ON)=500mΩ(Typ) (VDD=12V, Ta=25°C, Io=0.25A).
  • Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip.
  • 1c.

BD1HC500FVM-C Distributor & Price

Compare BD1HC500FVM-C distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.